Categories
Engineering

Hi, This is a project require to be done. Please look at file name (Project prop

Hi,
This is a project require to be done. Please look at file name (Project proposal) and follow :
Aims, Objectives, and Scope of the Project
Research Questions
Methodology
please use this software in this project :
Solidworks and Ansys software for the design and simulation of the turbine and will involve testing various parameters to optimize the design for maximum efficiency.
then we will calculate :
Efficiency and Coefficient of Power.
the Design will be of one, two and three stages
Type of Material : Aluminium and Steel .
under file name( Project7755) you can take the ideas from it and try not coppy from it.
lastly under file name( Example of project) Follow the method of writing, arranging and formatting the file. I want my file similar to it.
please try to write around 9000 words and provide me with Solidworks and Ansys files that related to the project.
use UWE Bristol Harvard – Referencing.
you can reference books, articles etc by this link ( https://www.uwe.ac.uk/library/info/refbuilder/ )

Categories
Engineering

Create 3d and 2d drawing for each model in “file.docx” below, using Autodesk Fus

Create 3d and 2d drawing for each model in “file.docx” below, using Autodesk Fusion 360 or any other software that can still be opened using Autodesk Fusion 360. And, after you are done can you save it on “file.f3d” format. If you have any questions please feel free to ask.

Categories
Engineering

1)Performed literature review of the design and analysis of mid- and high-rise w

1)Performed literature review of the design and analysis of mid- and high-rise wood building subjected to extreme loading conditions including earthquake(SAP2000), wind, and
fire.
2)Developed a state-of-the-art finite element model to capture the effect of earthquake and fire on the structural integrity of wood buildings.
3)Analyzed the data and recommended new guidelines for the design of wood buildings
when subjected to multi-hazard, specifically, fire following earthquakes

Categories
Engineering

apply Deep Learning to surface and subsurfaces Defect Detection in Additive man

apply Deep Learning to surface and subsurfaces Defect Detection in Additive manufacturing, Powder Spreading Process of Magnetic Material Additive Manufacturing or in laser powder bed fusion, selective laser melting process or for laser directed energy deposition via powder feeding. I have attached the files for better understanding. my main focus is on defects that on what types of defects should i focus on and then to apply deep learning approach which should be fast and robust. I want good proposal that have some novality so that on which I can have 4 SCI papers or one Sci good paper of impact factor of 6QS Ranking, as my group head told me that it’s the requirement for the degree. if you any other questions you can ask and also need of improving my research title should be more professional and also have plan to work in future for paper writing after getting approval of proposal so give rough idea about cost of good SCI paper writing

Categories
Engineering

The preliminary literature review is simply a one (preferable) or two-page (at m

The preliminary literature review is simply a one (preferable) or two-page (at most) document that contains the following:
Title (2 point) – Title must be concise and relevant to the table of content and section titles
Abstract (6 points) – If you never wrote an abstract, you need to learn how to write it. Abstract must be less then 500 words and serve as an executive summary of the paper. Use APA citation format.
Outline (6 points) – Outline for the final paper (potential table of contents, section titles). Think about the section titles after reviewing the sources. Do not include any explanations under the titles, just the titles are required.
Bibliography (6 points) – This must have a minimum of four journal and/or textbook references. These must be real journals, which you can find in online sources such as the ASU Online Library, but cannot be only online web sites like blogs. In addition, you can use one or two, maximum of two, web sources such as Wikipedia if it helps you with a definition; however, the majority of your paper must be based on real journal and/or textbook references. My recommendation is you uses the ASU Online Library search rather than Google. You will spend hours searching through Google looking for real journal articles; however, in the ASU Online Library (you will find it in your MyASU), you can quickly narrow your search to books and journals only, and it is free.
The following links might be helpful if you are not familiar with writing a literature review:
Getting Started on a Literature ReviewLinks to an external site.

Categories
Engineering

I need metrics to be created and generate a preliminary report containing charts

I need metrics to be created and generate a preliminary report containing charts and other sources covering:
– Mine Capital Costs
– Mine Operating unit costs.
– Footprint area.
– Pre-development duration.
– Equipment productivites
– Mine personnel numbers.
– Extraction layout
– column heights
– Ventilation
– Preconditiong
– Ground Support
I need data for at least 6 reputed mines with high production rates.

Categories
Engineering

I need to present the friction formula so for the starting I would like to name

I need to present the friction formula so for the starting I would like to name all of the fraction formula and then talk in depth of friction formula for rolling.
Also would like to give one example question to explain how this formula works
And is it possible to add some photos and I need to present for 5 minutes
The PowerPoint looks like something like the doc I send you

Categories
Engineering

I need metrics to be created and generate a preliminary report containing charts

I need metrics to be created and generate a preliminary report containing charts and other sources covering:
– Mine Capital Costs
– Mine Operating unit costs.
– Footprint area.
– Pre-development duration.
– Equipment productivites
– Mine personnel numbers.
– Extraction layout
– column heights
– Ventilation
– Preconditiong
– Ground Support
I need data for at least 6 reputed mines with high production rates.

Categories
Engineering

The aeronautical project consist of the preliminary, and conceptual design of a

The aeronautical project consist of the preliminary, and conceptual
design of a UAV. It also includes its CAD design using the software
CATIA and an aerodynamic optimization process using ANSYS. The
literature review should include an overview of the subject, issue, or theory
under consideration; group sources into categories and
concepts (in support or against a particular position); present connections
between the sources; draw conclusions about those works that make the
greatest contribution to the understanding and development of the topic.

Categories
Engineering

The aeronautical project consist of the preliminary, and conceptual design of a

The aeronautical project consist of the preliminary, and conceptual
design of a UAV. It also includes its CAD design using the software
CATIA and an aerodynamic optimization process using ANSYS. The
literature review should include an overview of the subject, issue, or theory
under consideration; group sources into categories and
concepts (in support or against a particular position); present connections
between the sources; draw conclusions about those works that make the
greatest contribution to the understanding and development of the topic.